Fencing Materials

A heavy duty Close Board fence panel. Made in the U.K. using pressure treated, home grown softwoood.

Height: 914mm (3')
Width: 1829mm (6’)

- 47 x 30mm framework
- ex. 22 x 125mm feather edge
- Nailed construction
- Pressure Treated green
- Finished with planed capping

A sturdy yet affordable Overlap Panel which is built to last.

- 6' wide x 5' high (1829mm wide x 1524mm high)
- Fully pressure treated panels
- Nailed construction
- Waney-edge, horizontal, sawn-finish slats
- Five vertical battens one side and three vertical battens on the other side (approx. 16 x 38mm)
- Framed top and bottom on one side (approx. 18 x 50mm)
- Finished and protected with a top capping strip
- Manufactured in the U.K.

Diamond Trellis panels are constructed using good quality planed battens, they are framed all round with rebated framing. This attractive trellis panel obscures visibilty between boundaries without the need of a solid fence or the need to block out daylight. This product is pressure treated green.

- Width: 1829mm ( 6' )
- Height: (approx.) 260mm (Middle) → 150mm (Edge)
- Hole Size: (approx.) 50 x 50mm.
- Frame Thickness: 30mm
- Pressure Treated

A sturdy yet affordable Overlap Panel which is built to last.

- 6' wide x 6' high (1829mm wide x 1829mm high)
- Fully pressure treated panels
- Nailed construction
- Waney-edge, horizontal, sawn-finish slats
- Five vertical battens one side and three vertical battens on the other side (approx. 16 x 38mm)
- Framed top and bottom on one side (approx. 18 x 50mm)
- Finished and protected with a top capping strip
- Manufactured in the U.K.

A premium quality Overlap Panel which is built to last.

Height: 1219mm (4')
Width: 1829mm (6')

- Fully pressure treated panels
- Nailed construction
- Straight-edge, horizontal, sawn-finish slats
- Five vertical battens on both sides (approx. 16 x 38mm)
- Framed top and bottom on both sides (approx. 16 x 38mm)
- Finished and protected with a top capping strip
- These panels look the same from both sides, perfect for shared boundaries
- Manufactured in the U.K.

Wire netting is popular for making poultry runs and enclosures, aviary and bird cages, crop guards, rabbit proofing and general purpose fencing.
This wire netting is produced using galvanised wire, it is also hot dipped galvanised after manufacture to offer double corrosion resistance.

Height: 1200mm
Length: 10m
Mesh Size: 25mm
Wire Gauge: 20g (0.9mm)
Manufactured to BS EN 10223-2 1998 Reverse Twist Specification.

25m & 50m rolls are available to order, typical lead time 1-2 working days. Call us on 0117 9674382 for prices and availability.

Diamond Trellis panels are constructed using good quality planed battens, they are framed all round with rebated framing. This attractive trellis panel obscures visibilty between boundaries without the need of a solid fence or the need to block out daylight. This product is pressure treated green.

- Width: 1829mm ( 6' )
- Height: 600mm
- Hole Size: (approx.) 50 x 50mm.
- Frame Thickness: 30mm
- Pressure Treated

3.0m slotted concrete post; fully slotted in a "H" design on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 3000mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 58kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

A heavy duty Close Board fence panel. Made in the U.K. using pressure treated, home grown softwoood.

Height: 1219mm (4')
Width: 1829mm (6’)

- 47 x 30mm framework
- ex. 22 x 125mm feather edge
- Nailed construction
- Pressure Treated green
- Finished with planed capping

Diamond Trellis panels are constructed using good quality planed battens, they are framed all round with rebated framing. This attractive trellis panel obscures visibilty between boundaries without the need of a solid fence or the need to block out daylight. This product is pressure treated green.

- Width: 1829mm ( 6' )
- Height: (approx.) 425mm (Middle) → 320mm (Edge)
- Hole Size: (approx.) 50 x 50mm.
- Frame Thickness: 30mm
- Pressure Treated

Square Trellis Panels are sturdy and built to last; made from sawn finish 19 x 38mm batten; nailed construction. Pressure treated Green.

- Width: 1829mm ( 6’ )
- Height: 1525mm ( 5’ )
- Hole Size: 110 x 110mm (approx.)
- 19 x 38mm Sawn Batten
- Nailed Construction
- Pressure Treated Green

This post support is designed to hold a 150 x 150mm square wooden post in position when it’s not possible to concrete a post into the ground. The bolt-clamp on the side of the post support ensures a quick and secure fit.

- Designed to fit 150 x 150mm square wooden posts
- Bolt-Grip post securing system
- Bolt down plate: 250 x 250mm
- Bolt holes: 4 x 12mm Ø holes for bolting down the base (approx. 210mm hole centres)
- Manufactured from heavy gauge 3mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

Wire netting is popular for making poultry runs and enclosures, aviary and bird cages, crop guards, rabbit proofing and general purpose fencing.
This wire netting is produced using galvanised wire, it is also hot dipped galvanised after manufacture to offer double corrosion resistance.

Height: 1200mm
Length: 10m
Mesh Size: 13mm
Wire Gauge: 23g (0.57mm)
Manufactured to BS EN 10223-2 1998 Reverse Twist Specification.

25m & 50m rolls are available to order, typical lead time 1-2 working days. Call us on 0117 9674382 for prices and availability.

A premium quality Overlap Panel which is built to last.

Height: 1524mm (5')
Width: 1829mm (6')

- Fully pressure treated panels
- Nailed construction
- Straight-edge, horizontal, sawn-finish slats
- Five vertical battens on both sides (approx. 16 x 38mm)
- Framed top and bottom on both sides (approx. 16 x 38mm)
- Finished and protected with a top capping strip
- These panels look the same from both sides, perfect for shared boundaries
- Manufactured in the U.K.

2.4m slotted Concrete End Post; fully slotted on one side for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2400mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 50kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside