Search
Fixings & Metalwork
1 Litre Black Jack Felt Adhesive
A cold applied oxidised bitumen based adhesive.
Used to bond roofing felt to most surfaces, sealing felt laps and as a cold gritting solution for bonding mineral chippings
Approx. coverage: 1.4m² / litre
Used to bond roofing felt to most surfaces, sealing felt laps and as a cold gritting solution for bonding mineral chippings
Approx. coverage: 1.4m² / litre
Stock Availability:
9 in stock
£10.00 Inc. VAT
1000mm Heavy Engineered Strap
The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of floor joists and the bottom chords of trusses without the need for notching.
Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.
Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.
Stock Availability:
25 in stock
£4.38 Inc. VAT
1000mm x 28mm x 2mm Flat Strap
For vertical and horizontal restraint when connecting timber floor and roof systems to masonry walls.
Stock Availability:
59 in stock
£4.62 Inc. VAT
1000mm x 28mm x 2mm Twisted Strap
Pre-galvanised twisted restraint straps, designed to building regulations for vertical restraint.
Strap thickness: 2mm
Strap width: 28mm
Strap total length: 1000mm
Distance from top of strap to top of twist: 100mm
6mm holes along the length of the strap
Strap thickness: 2mm
Strap width: 28mm
Strap total length: 1000mm
Distance from top of strap to top of twist: 100mm
6mm holes along the length of the strap
Stock Availability:
5 in stock
£4.13 Inc. VAT
1000mm x 28mm x 4mm Flat Strap
For vertical and horizontal restraint when connecting timber floor and roof systems to masonry walls.
Stock Availability:
46 in stock
£7.19 Inc. VAT
100mm Corner Brace
Metal brace for strengthening corners. Can be used for internal or external corners.
Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole.
Bright Zinc Plated (BZP) for corrosion resistance.
Thickness: 2.0mm
Width: 24mm
Length: 100mm x 100mm
Drill Holes: 6.0mm (x6)
Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole.
Bright Zinc Plated (BZP) for corrosion resistance.
Thickness: 2.0mm
Width: 24mm
Length: 100mm x 100mm
Drill Holes: 6.0mm (x6)
Stock Availability:
73 in stock
From £0.61 Inc. VAT
100mm Corner Plate
Metal corner plate for strengthening corners. Pre-drilled fixing holes for use with countersunk screws.
Bright Zinc Plated (BZP) for corrosion resistance.
Thickness: 2.0mm
Width: 16mm
Length: 100mm x 100mm
Fixing Holes: 6.0mm (x6)
Bright Zinc Plated (BZP) for corrosion resistance.
Thickness: 2.0mm
Width: 16mm
Length: 100mm x 100mm
Fixing Holes: 6.0mm (x6)
Stock Availability:
63 in stock
£0.50 Inc. VAT
100mm Flush Head Timberfast Screws - Box 50
Self drilling timber screws, made from high tensile steel for extreme strength. Perfect for many structural & landscaping projects. These Timberfast screws have a Flush Washer Head with a T30 Torx Drive, which reduces the chance of "cam out", the flush 16mm diameter washer head ensures that materials are securely clamped together when the screw is tightened, leaving a smart, flush appearance.
Popular uses include: building, fencing, decking (connecting framework) and joining sleepers
- Boxes of 50 screws, ¼" T30 Torx Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant Green Ruspert® coating - details in download tab below
Popular uses include: building, fencing, decking (connecting framework) and joining sleepers
- Boxes of 50 screws, ¼" T30 Torx Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant Green Ruspert® coating - details in download tab below
Stock Availability:
21 in stock
£17.40 Inc. VAT
100mm Galv. Wire Nails - 25kg (Approx. 1925)
Traditional round wire nails for fixing timber to timber. Large head for increased holding power.
This product is not stocked. Typical availability is 1 - 2 working days from order.
Nail Length: 100mm
Nail gauge: 4.5mm
Average nail count = 77 /kg
Finish: Galvanised, service class 3 according to EN 10016-2
Manufactured to BS EN 10230-1
This product is not stocked. Typical availability is 1 - 2 working days from order.
Nail Length: 100mm
Nail gauge: 4.5mm
Average nail count = 77 /kg
Finish: Galvanised, service class 3 according to EN 10016-2
Manufactured to BS EN 10230-1
Stock Availability:
Not in stock - This item is available to order.
£88.64 Inc. VAT
100mm Galvanised Wire Nails - 1kg (Approx. 77)
Traditional round wire nails for fixing timber to timber. Large head for increased holding power.
Nail Length: 100mm
Nail gauge: 4.5mm
Average nail count = 77 /kg
Finish: Galvanised, service class 3 according to EN 10016-2
Manufactured to BS EN 10230-1
Nail Length: 100mm
Nail gauge: 4.5mm
Average nail count = 77 /kg
Finish: Galvanised, service class 3 according to EN 10016-2
Manufactured to BS EN 10230-1
Stock Availability:
18 in stock
From £5.99 Inc. VAT
100mm Hex Head Timberfast Screws - Box 50
Self drilling timber screws, made from high tensile steel for extreme strength. Perfect for many structural & landscaping projects. These Timberfast screws have a Hex Washer Head, which reduces the chance of "cam out", the moulded 12mm diameter washer ensures that materials are securely clamped together when the screw is tightened.
Popular uses include: building, fencing, decking (connecting framework) and joining sleepers
- Boxes of 50 screws, ¼" Hex Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant black Ruspert® coating - details in download tab below
Popular uses include: building, fencing, decking (connecting framework) and joining sleepers
- Boxes of 50 screws, ¼" Hex Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant black Ruspert® coating - details in download tab below
Stock Availability:
21 in stock
£15.82 Inc. VAT
100mm Mending Plate
A mild steel plate with fixing holes used for strengthening and repairs.
Pre-drilled fixing holes for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance.
Thickness: 2.0mm
Width: 19mm
Length: 100mm
Fixing Holes: 5.0mm (x4)
Pre-drilled fixing holes for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance.
Thickness: 2.0mm
Width: 19mm
Length: 100mm
Fixing Holes: 5.0mm (x4)
Stock Availability:
90 in stock
From £0.31 Inc. VAT
100mm T Plate
Steel T-plate suitable for a range of timber frame building uses. Bright Zinc Plated (BZP) for corrosion resistance.
Thickness: 2.0mm
Overall Width: 100mm x 19mm
Overall Length: 100mm x 19mm
Fixing Holes: 6.0mm (x5)
Thickness: 2.0mm
Overall Width: 100mm x 19mm
Overall Length: 100mm x 19mm
Fixing Holes: 6.0mm (x5)
Stock Availability:
58 in stock
£0.94 Inc. VAT
100mm Vine Eye To Screw
100mm Vine Eye with screw end, used for straining wire for climbing plants.
- Length: 100mm
- Thickness: 4.0mm
- Internal eye diameter: 11mm
- Mild Steel
- Bright Zinc Plated (BZP)
- Folded Eye (Unwelded)
33.3% discount for box quantities
- Length: 100mm
- Thickness: 4.0mm
- Internal eye diameter: 11mm
- Mild Steel
- Bright Zinc Plated (BZP)
- Folded Eye (Unwelded)
33.3% discount for box quantities
Stock Availability:
78 in stock
£0.40 Inc. VAT
110mm Fencemate Adjustable Bolt Down Post Support
A post support fitting for installing timber posts and timber framework. The timber sits on the Post Support out of ground contact, which prevents rotting due to moisture from the ground. The height/level of the square support plate can easily be adjusted which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.
Installation: drill a 22mm diameter hole in the end of the timber post for the threaded bar to fit into, the depth of hole will vary depending on how much elevation is required. The post should sit firmly over the threaded bar down to the square support plate. The two nuts are tightened against each other to lock the support plate in the required position. The bottom of the post support is designed to be bolted down to a concrete base, we recommend using M10 Thunder Bolts.
- Welded construction, galvanised steel
- Total Height - 255mm
- Threaded bar - 22mm diameter
- Square support plate - 100 x 100mm x 4.5mm
- Bolt Down Plate - 100 x 100mm x 4.5mm
- 11mm fixing holes (x8)
Installation: drill a 22mm diameter hole in the end of the timber post for the threaded bar to fit into, the depth of hole will vary depending on how much elevation is required. The post should sit firmly over the threaded bar down to the square support plate. The two nuts are tightened against each other to lock the support plate in the required position. The bottom of the post support is designed to be bolted down to a concrete base, we recommend using M10 Thunder Bolts.
- Welded construction, galvanised steel
- Total Height - 255mm
- Threaded bar - 22mm diameter
- Square support plate - 100 x 100mm x 4.5mm
- Bolt Down Plate - 100 x 100mm x 4.5mm
- 11mm fixing holes (x8)
Stock Availability:
11 in stock
£20.69 Inc. VAT
1200mm Heavy Engineered Strap
The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of floor joists and the bottom chords of trusses without the need for notching.
Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.
Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.
Stock Availability:
31 in stock
£5.26 Inc. VAT
125mm Flush Head Timberfast Screws - Box 50
Self drilling timber screws, made from high tensile steel for extreme strength. Perfect for many structural & landscaping projects. These Timberfast screws have a Flush Washer Head with a T30 Torx Drive, which reduces the chance of "cam out", the flush 16mm diameter washer head ensures that materials are securely clamped together when the screw is tightened, leaving a smart, flush appearance.
Popular uses include: building, fencing, decking (connecting framework) and joining sleepers
- Boxes of 50 screws, ¼" T30 Torx Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant Green Ruspert® coating - details in download tab below
Popular uses include: building, fencing, decking (connecting framework) and joining sleepers
- Boxes of 50 screws, ¼" T30 Torx Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant Green Ruspert® coating - details in download tab below
Stock Availability:
20 in stock
£22.10 Inc. VAT
125mm Galvanised Wire Nails - 1kg (Approx. 42)
Traditional round wire nails for fixing timber to timber. Large head for increased holding power.
Nail Length: 125mm
Nail gauge: 5.6mm
Average nail count = 42 /kg
Finish: Galvanised, service class 3 according to EN 10016-2
Manufactured to BS EN 10230-1
Nail Length: 125mm
Nail gauge: 5.6mm
Average nail count = 42 /kg
Finish: Galvanised, service class 3 according to EN 10016-2
Manufactured to BS EN 10230-1
Stock Availability:
12 in stock
From £5.99 Inc. VAT
125mm Hex Head Timberfast Screws - Box 50
Self drilling timber screws, made from high tensile steel for extreme strength. Perfect for many structural & landscaping projects. These Timberfast screws have a Hex Washer Head, which reduces the chance of "cam out", the moulded 12mm diameter washer ensures that materials are securely clamped together when the screw is tightened.
Popular uses include: building, fencing, decking (connecting framework) and joining sleepers
- Boxes of 50 screws, ¼" Hex Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant black Ruspert® coating - details in download tab below
Popular uses include: building, fencing, decking (connecting framework) and joining sleepers
- Boxes of 50 screws, ¼" Hex Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant black Ruspert® coating - details in download tab below
Stock Availability:
23 in stock
£20.21 Inc. VAT
13mm Galvanised Felt Clout Nails - 500g (Approx. 345)
Short galvanised nails with an extra large clout head, designed for fixing down shed felt.
Approximately 345 nails per 500g pack.
Approximately 345 nails per 500g pack.
Stock Availability:
25 in stock
From £3.97 Inc. VAT
1500mm Heavy Engineered Strap
The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of floor joists and the bottom chords of trusses without the need for notching.
Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.
Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.
Stock Availability:
20 in stock
£7.18 Inc. VAT
150mm Corner Brace
Metal brace for strengthening corners. Can be used for internal or external corners.
Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole.
Bright Zinc Plated (BZP) for corrosion resistance.
Thickness: 2.5mm
Width: 24mm
Length: 150mm x 150mm
Drill Holes: 7.0mm (x6)
Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole.
Bright Zinc Plated (BZP) for corrosion resistance.
Thickness: 2.5mm
Width: 24mm
Length: 150mm x 150mm
Drill Holes: 7.0mm (x6)
Stock Availability:
67 in stock
From £1.48 Inc. VAT
150mm Eye Bolt
Folded eye bolt, used for straining and tightening wires.
- Length: 150mm (to centre of eye)
- ⅜" Imperial thread (approx. 9mm thick)
- Internal eye diameter 15mm
- Includes 2 nuts & 2 Washers
- Bright Zinc Plated finish
- Length: 150mm (to centre of eye)
- ⅜" Imperial thread (approx. 9mm thick)
- Internal eye diameter 15mm
- Includes 2 nuts & 2 Washers
- Bright Zinc Plated finish
Stock Availability:
44 in stock
£1.55 Inc. VAT
150mm Flush Head Timberfast Screws - Box 50
Self drilling timber screws, made from high tensile steel for extreme strength. Perfect for many structural & landscaping projects. These Timberfast screws have a Flush Washer Head with a T30 Torx Drive, which reduces the chance of "cam out", the flush 16mm diameter washer head ensures that materials are securely clamped together when the screw is tightened, leaving a smart, flush appearance.
Popular uses include: building, fencing, decking (connecting framework) and joining sleepers
- Boxes of 50 screws, ¼" T30 Torx Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant Green Ruspert® coating - details in download tab below
Popular uses include: building, fencing, decking (connecting framework) and joining sleepers
- Boxes of 50 screws, ¼" T30 Torx Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant Green Ruspert® coating - details in download tab below
Stock Availability:
19 in stock
£25.44 Inc. VAT
150mm Galv. Wire Nails - 25kg (Approx. 725)
Traditional round wire nails for fixing timber to timber. Large head for increased holding power.
Nail Length: 150mm
Nail gauge: 6.0mm
Average nail count = 29 /kg
Finish: Galvanised, service class 3 according to EN 10016-2
Manufactured to BS EN 10230-1
Nail Length: 150mm
Nail gauge: 6.0mm
Average nail count = 29 /kg
Finish: Galvanised, service class 3 according to EN 10016-2
Manufactured to BS EN 10230-1
Stock Availability:
2 in stock
£99.41 Inc. VAT
150mm Galvanised Wire Nails - 1kg (Approx. 29)
Traditional round wire nails for fixing timber to timber. Large head for increased holding power.
Nail Length: 150mm
Nail gauge: 6.0mm
Average nail count = 29 /kg
Finish: Galvanised, service class 3 according to EN 10016-2
Manufactured to BS EN 10230-1
Nail Length: 150mm
Nail gauge: 6.0mm
Average nail count = 29 /kg
Finish: Galvanised, service class 3 according to EN 10016-2
Manufactured to BS EN 10230-1
Stock Availability:
10 in stock
From £5.99 Inc. VAT
150mm Hex Head Timberfast Screws - Box 50
Self drilling timber screws, made from high tensile steel for extreme strength. Perfect for many structural & landscaping projects. These Timberfast screws have a Hex Washer Head, which reduces the chance of "cam out", the moulded 12mm diameter washer ensures that materials are securely clamped together when the screw is tightened.
Popular uses include: building, fencing, decking (connecting framework) and joining sleepers
- Boxes of 50 screws, ¼" Hex Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant black Ruspert® coating - details in download tab below
Popular uses include: building, fencing, decking (connecting framework) and joining sleepers
- Boxes of 50 screws, ¼" Hex Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant black Ruspert® coating - details in download tab below
Stock Availability:
28 in stock
£23.11 Inc. VAT
150mm Mending Plate
A mild steel plate with fixing holes used for strengthening and repairs.
Pre-drilled for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance.
Thickness: 2.5mm
Width: 26mm
Length: 150mm
Fixing Holes: 5.0mm (x4)
Pre-drilled for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance.
Thickness: 2.5mm
Width: 26mm
Length: 150mm
Fixing Holes: 5.0mm (x4)
Stock Availability:
51 in stock
From £0.68 Inc. VAT
150mm x 450mm Extended Joist Hanger
Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.
- Suitable for 150mm wide timber
- Width - 287mm (including fixing wings)
- Height - 440mm
- Depth - 55mm
- Suitable for 150mm wide timber
- Width - 287mm (including fixing wings)
- Height - 440mm
- Depth - 55mm
Stock Availability:
29 in stock
£4.98 Inc. VAT
2.5 Litre Black Jack Felt Adhesive
A cold applied oxidised bitumen based adhesive.
Used to bond roofing felt to most surfaces, sealing felt laps and as a cold gritting solution for bonding mineral chippings
Approx. coverage: 1.4m² / litre (3.5m² / tin)
Used to bond roofing felt to most surfaces, sealing felt laps and as a cold gritting solution for bonding mineral chippings
Approx. coverage: 1.4m² / litre (3.5m² / tin)
Stock Availability:
5 in stock
£19.99 Inc. VAT
200mm Eye Bolt
Folded eye bolt, used for straining and tightening wires.
- Length: 200mm (to centre of eye)
- ⅜" Imperial thread (approx. 9mm thick)
- Internal eye diameter 15mm
- Includes 2 nuts & 2 Washers
- Bright Zinc Plated finish
- Length: 200mm (to centre of eye)
- ⅜" Imperial thread (approx. 9mm thick)
- Internal eye diameter 15mm
- Includes 2 nuts & 2 Washers
- Bright Zinc Plated finish
Stock Availability:
39 in stock
£1.68 Inc. VAT
200mm Flush Head Timberfast Screws - Box 50
Self drilling timber screws, made from high tensile steel for extreme strength. Perfect for many structural & landscaping projects. These Timberfast screws have a Flush Washer Head with a T30 Torx Drive, which reduces the chance of "cam out", the flush 16mm diameter washer head ensures that materials are securely clamped together when the screw is tightened, leaving a smart, flush appearance.
Popular uses include: building, fencing, decking (connecting framework) and joining sleepers
- Boxes of 50 screws, ¼" T30 Torx Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant Green Ruspert® coating - details in download tab below
Popular uses include: building, fencing, decking (connecting framework) and joining sleepers
- Boxes of 50 screws, ¼" T30 Torx Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant Green Ruspert® coating - details in download tab below
Stock Availability:
14 in stock
£40.87 Inc. VAT
200mm Hex Head Timberfast Screws - Box 50
Self drilling timber screws, made from high tensile steel for extreme strength. Perfect for many structural & landscaping projects. These Timberfast screws have a Hex Washer Head, which reduces the chance of "cam out", the moulded 12mm diameter washer ensures that materials are securely clamped together when the screw is tightened.
Popular uses include: building, fencing, decking (connecting framework) and joining sleepers
- Boxes of 50 screws, ¼" Hex Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant black Ruspert® coating - details in download tab below
Popular uses include: building, fencing, decking (connecting framework) and joining sleepers
- Boxes of 50 screws, ¼" Hex Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant black Ruspert® coating - details in download tab below
Stock Availability:
16 in stock
£36.50 Inc. VAT
20mm Galvanised Staple - 500g Bag (Approx. 540)
Cut point staples, typically used for attaching wire and netting to timber.
Staple length: 20mm
Staple gauge: 2.0mm
Average staple count = 1079 /kg
Finish: Galvanised, service class 3
Staple length: 20mm
Staple gauge: 2.0mm
Average staple count = 1079 /kg
Finish: Galvanised, service class 3
Stock Availability:
13 in stock
From £3.79 Inc. VAT
20mm x 10m Fixing Band
Galvanised fixing band FB20A has many building & DIY uses.
- Flexible galvanised steel can be easily shaped by hand
- 1mm thick
- 20mm Wide
- 10m Coil
- Includes three hole options to suit a variety of fixings
- Flexible galvanised steel can be easily shaped by hand
- 1mm thick
- 20mm Wide
- 10m Coil
- Includes three hole options to suit a variety of fixings
Stock Availability:
16 in stock
£11.12 Inc. VAT
250mm Eye Bolt
Folded eye bolt, used for straining and tightening wires.
- Length: 250mm (to centre of eye)
- ⅜" Imperial thread (approx. 9mm thick)
- Internal eye diameter 15mm
- Includes 2 nuts & 2 Washers
- Bright Zinc Plated finish
- Length: 250mm (to centre of eye)
- ⅜" Imperial thread (approx. 9mm thick)
- Internal eye diameter 15mm
- Includes 2 nuts & 2 Washers
- Bright Zinc Plated finish
Stock Availability:
40 in stock
£1.92 Inc. VAT
250mm Hex Head Timberfast Screws - Box 50
Self drilling timber screws, made from high tensile steel for extreme strength. Perfect for many structural & landscaping projects. These Timberfast screws have a Hex Washer Head, which reduces the chance of "cam out", the moulded 12mm diameter washer ensures that materials are securely clamped together when the screw is tightened.
Popular uses include: building, fencing, decking (connecting framework) and joining sleepers
- Boxes of 50 screws, ¼" Hex Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant black Ruspert® coating - details in download tab below
Popular uses include: building, fencing, decking (connecting framework) and joining sleepers
- Boxes of 50 screws, ¼" Hex Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant black Ruspert® coating - details in download tab below
Stock Availability:
21 in stock
£48.67 Inc. VAT
25mm Galvanised Staple - 1kg Bag (Approx. 486)
Cut point staples, typically used for attaching wire and netting to timber.
Staple length: 25mm
Staple gauge: 2.65mm
Average staple count = 486 /kg
Finish: Galvanised, service class 3
Staple length: 25mm
Staple gauge: 2.65mm
Average staple count = 486 /kg
Finish: Galvanised, service class 3
Stock Availability:
16 in stock
From £7.49 Inc. VAT
25mm Sherardised Panel Pins - ½kg Bag
Light-duty nails /pins suited to fixing small decorative components; timber to timber. Small head for flush finish.
Pin length: 25mm
Pin gauge: 1.6mm
Average pin count = 2340 /kg (½ kg bag)
Finish: Sherardised, service class 2
Manufactured to BS EN 10230-1
Pin length: 25mm
Pin gauge: 1.6mm
Average pin count = 2340 /kg (½ kg bag)
Finish: Sherardised, service class 2
Manufactured to BS EN 10230-1
Stock Availability:
8 in stock
From £7.73 Inc. VAT
3.5 x 16mm Superdrive Woodscrews - Box 200
High performance woodscrews, manufactured from high quality, low carbon steel & case hardened. The type 17 point, knurled thread and wax coating all help reduce the torque required for quick insertion.
- Thread diameter: 3.5mm
- Length: 16mm
- Box of 200 screws
- Free PZ2 driving bit included with every box
- Thread diameter: 3.5mm
- Length: 16mm
- Box of 200 screws
- Free PZ2 driving bit included with every box
Stock Availability:
4 in stock
£2.57 Inc. VAT
3.5 x 32mm Stainless Steel Tongue-Tite Screws - Box 200
These Stainless Steel lost-head screws are similar in size to a lost-head nail. They are designed to be used as a hidden fixing for tongue & groove flooring and timber cladding but are perfect for many other projects. Tongue-Tite Plus is intended to be installed at a 30-45 degree angle through the tongue of the board, allowing the groove to fit over the head of the screw. This screw can also be used to face-fix boards, the small head is barely visible when when driven just below the timber surface.
Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.
TX10 screwdriver bit included in the box.
Screw Head Diameter = 4.5mm
Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.
TX10 screwdriver bit included in the box.
Screw Head Diameter = 4.5mm
Stock Availability:
141 in stock
£11.95 Inc. VAT
3.5 x 45mm Stainless Steel Tongue-Tite Screws - Box 200
These Stainless Steel lost-head screws are similar in size to a lost-head nail. They are designed to be used as a hidden fixing for tongue & groove flooring and timber cladding but are perfect for many other projects. Tongue-Tite Plus is intended to be installed at a 30-45 degree angle through the tongue of the board, allowing the groove to fit over the head of the screw. This screw can also be used to face-fix boards, the small head is barely visible when when driven just below the timber surface.
Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.
TX10 screwdriver bit included in the box.
Screw Head diameter = 4.5mm
Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.
TX10 screwdriver bit included in the box.
Screw Head diameter = 4.5mm
Stock Availability:
141 in stock
£12.54 Inc. VAT
3.5 x 49mm Stainless Steel Tongue-Tite Screws - Box 200
These Stainless Steel lost-head screws are similar in size to a lost-head nail. They are designed to be used as a hidden fixing for tongue & groove flooring and timber cladding but are perfect for many other projects. Tongue-Tite Plus is intended to be installed at a 30-45 degree angle through the tongue of the board, allowing the groove to fit over the head of the screw. This screw can also be used to face-fix boards, the small head is barely visible when when driven just below the timber surface.
Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.
TX10 screwdriver bit included in the box.
Screw Head Diameter = 4.5mm
Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.
TX10 screwdriver bit included in the box.
Screw Head Diameter = 4.5mm
Stock Availability:
48 in stock
£12.60 Inc. VAT
3.5 x 60mm Stainless Steel Tongue-Tite Screws - Box 200
These Stainless Steel lost-head screws are similar in size to a lost-head nail. They are designed to be used as a hidden fixing for tongue & groove flooring and timber cladding but are perfect for many other projects. Tongue-Tite Plus is intended to be installed at a 30-45 degree angle through the tongue of the board, allowing the groove to fit over the head of the screw. This screw can also be used to face-fix boards, the small head is barely visible when when driven just below the timber surface.
Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.
TX10 screwdriver bit included in the box.
Screw Head Diameter = 4.5mm
Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.
TX10 screwdriver bit included in the box.
Screw Head Diameter = 4.5mm
Stock Availability:
33 in stock
£16.79 Inc. VAT
300ml Exocet Polyester Resin (Includes One Nozzle)
Injection resin used for anchoring threaded bar into concrete, stone, masonry, brickwork and hollow masonry.
- One mixer nozzle supplied per 300ml tube, extra nozzles available to purchase separately
- Two part resin, apply in one single action with a caulking gun
- Suitable for indoor and outdoor applications
- Colour: Grey
- One mixer nozzle supplied per 300ml tube, extra nozzles available to purchase separately
- Two part resin, apply in one single action with a caulking gun
- Suitable for indoor and outdoor applications
- Colour: Grey
Stock Availability:
17 in stock
£8.80 Inc. VAT
30mm Fence Panel L-Clip
30mm Fence Panel L-Clip, a useful panel clip for discreet fixing that can only be seen from one side. Can also be used to fix gravel boards, as well as many uses as a general purpose corner bracket.
- Angle: 30 x 30mm
- Height: 50mm
- Galvanised Steel
- Angle: 30 x 30mm
- Height: 50mm
- Galvanised Steel
Stock Availability:
167 in stock
£0.60 Inc. VAT
30mm Galvanised Staple - 1kg Bag (Approx. 260)
Cut point staples, typically used for attaching wire and netting to timber.
Staple length: 30mm
Staple gauge: 3.55mm
Average staple count = 260 /kg
Finish: Galvanised, service class 3
Staple length: 30mm
Staple gauge: 3.55mm
Average staple count = 260 /kg
Finish: Galvanised, service class 3
Stock Availability:
11 in stock
From £7.49 Inc. VAT
30mm Sherardised Twisted Nail - 1kg
Square twisted nails; the recommended fixing for installation of joist hangers.
Nail length: 30mm
Nail gauge: 3.75mm
Average nail count = 350 /kg
Finish: Sherardised, service class 2
Nail length: 30mm
Nail gauge: 3.75mm
Average nail count = 350 /kg
Finish: Sherardised, service class 2
Stock Availability:
17 in stock
From £7.39 Inc. VAT
31mm x 1.8mm Stainless Ring Clout Nail - 1kg
Stainless steel nails with a serrated annular ring pattern along the shank; for extra pull-out resistance. This is the correct nail for installing Cedar Shingles. The clout head firmly secures shingles and helps to prevent the nail being over-driven or pulled through the timber by strong winds.
31mm x 1.8mm Stainless Steel Ring Clout Nail
1kg pack = approximately 1500 nails
1kg of nails will install approximately 4 bundles of Cedar Shingles
31mm x 1.8mm Stainless Steel Ring Clout Nail
1kg pack = approximately 1500 nails
1kg of nails will install approximately 4 bundles of Cedar Shingles
Stock Availability:
19 in stock
From £22.99 Inc. VAT
38mm x 2.65mm Stainless Steel Ring Clout Nail - 1kg
Stainless steel annular ringshank nails for fixing timber to timber. The threaded shank increases pull out resistance, large head for increased holding power.
Nail Length: 38mm
Nail gauge: 2.65mm
Average nail count = 350 /kg
Material: A2 Stainless steel, service class 3
Manufactured to BS 1202-1
Nail Length: 38mm
Nail gauge: 2.65mm
Average nail count = 350 /kg
Material: A2 Stainless steel, service class 3
Manufactured to BS 1202-1
Stock Availability:
8 in stock
From £22.99 Inc. VAT
Call us Monday - Friday 8am - 5pm. Saturday 8am - 12pm.
Payment options
