Round timber pole; suitable for agricultural use and in domestic gardens for building garden structures, garden furniture, raised beds, and retaining walls etc. This size of pole is also popular for outdoor activities including obstacle courses, bridge building etc. Machine round poles are regularised to ensure a uniform size. Pressure treated to UC4 standard. These poles are chamfered both ends.
These round poles are prone to shakes (splits) and not suitable for use in commercial play equipment.
- 150mm Diameter x 3.6m - Pole; chamfered both ends - Good quality, slow grown redwood - UC4 pressure treatment, 15 year guarantee
2.7m slotted concrete corner post; fully slotted on two adjacent sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.
- Post Dimensions: 123mm x 130mm x 2400mm - Slot Dimensions: 55mm (tapering to 50mm) x 23mm - 66kg Each - C50 Concrete (a strong mix) - Four 5.5mm rebar set inside
Diamond Trellis panels are constructed using good quality planed battens, they are framed all round with rebated framing. This attractive trellis panel obscures visibilty between boundaries without the need of a solid fence or the need to block out daylight. This product is pressure treated green.
Heavy Diamond Trellis panels are constructed using good quality planed battens, they are framed all round with rebated framing. This attractive trellis panel obscures visibilty between boundaries without the need of a solid fence or the need to block out daylight. This product is pressure treated green.
Heavy duty concrete fence post for feather-edge fencing. This post has a back-weathered top, 3 recesses with bolt holes for fencing rails and bolt holes at the bottom to fit a gravel board. View image 2 for post dimensions. This post is designed to suit 1.65m feather edge boarding with a 150mm gravel board.
- Post Length: 2485mm - Suitable for 1.65m Feather Edge + 150mm Gravel Board - Three Recesses for 47 x 75mm Rail - Use M8 x 180mm bolts to attach rails & gravel boards - 73kg Each
The Milano fence panel is a good quality, well-made, decorative fence panel. It looks the same from both sides; perfect for shared boundaries. These panels are constructed with ‘hit & miss’ slats that allow wind to pass through. This panel has a smooth machined finish and is pressure treated green.
Please note: This panel is 1800mm wide, not 1829mm (6’), you can increase the panel width to 1829mm by attaching panel packing strips, sold separately.
2.4m slotted concrete Corner post; fully slotted on two adjacent sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.
- Post Dimensions: 123mm x 130mm x 2400mm - Slot Dimensions: 55mm (tapering to 50mm) x 23mm - 66kg Each - C50 Concrete (a strong mix) - Four 5.5mm rebar set inside
Round timber pole; suitable for agricultural use and in domestic gardens for building garden structures, garden furniture, raised beds, and retaining walls etc. This size of pole is also popular for outdoor activities including obstacle courses, bridge building etc. Machine round poles are regularised to ensure a uniform size. Pressure treated to UC4 standard. These poles are chamfered both ends.
These round poles are prone to shakes (splits) and not suitable for use in commercial play equipment.
- 150mm Diameter x 3.0m - Pole; chamfered both ends - Good quality, slow grown redwood - UC4 pressure treatment, 15 year guarantee
Manufactured using heavily galvanised high tensile wire, it has 4 long sharp points spaced 100mm apart. Supplied on strong wooden spools with carrying handles for safety and ease of handling.
- 1.6mm Line Wires: 1050-1200 N/mm² - 1.45mm Barbing Wires: 415-550 N/mm² - Roll Weight: 10.5kg
Chain link fencing is wire mesh, woven into a diamond pattern. A popular style of fencing for sports grounds and for security purposes. It can be installed using timber posts or with metal posts which are specifically designed to suit chain link. Supplied in tightly wound rolls.
• Finish: Green P.V.C Coating • Height: 900mm • Roll Length: 12.5m • Mesh Size: 50 x 50mm • Wire Gauge: 1.70/2.50mm (Inner wire= 1.7mm, overall thickness inc. green coating= 2.5mm) • Green chain link has a galvanised wire core to ensure longevity • 26m of 2.24/3.15mm line wire included with each roll • Manufactured to BS EN 10223-6 1998 • Stretcher Bars, angle cleats etc. sold separately
Heavy Diamond Trellis panels are constructed using good quality planed battens, they are framed all round with rebated framing. This attractive trellis panel obscures visibilty between boundaries without the need of a solid fence or the need to block out daylight. This product is pressure treated green.
Heavy duty concrete fence post for feather-edge fencing. This post has a weathered top; 3 recesses with bolt holes for fencing rails and bolt holes at the bottom to fit a gravel board. View image 2 for dimensions. This post is suitable for 1.35m feather edge boarding with a 150mm gravel board.
- Post Length: 2205mm - Suitable for 1.35m Feather Edge + 150mm Gravel Board - Three Recesses for 47 x 75mm Rail - Use M8 x 180mm bolts to attach rails & gravel boards - 67kg Each
These concrete gravel boards are designed to be used with recessed concrete posts. Concrete gravel boards for recessed posts give feather edge fencing a level surface to sit on. Raising feather edge boards on a gravel board will help prevent rot caused by ground moisture, gravel boards also help to prevent damage to fence panels caused by lawn mowers and strimmers.
- Dimensions: 50mm x 150mm x 3000mm - 52kg Each - C50 Concrete (a strong mix) - Two 5.5mm rebar set inside - One 14mm diameter hole in the middle to attached a support post (if required)
Diamond Trellis panels are constructed using good quality planed battens, they are framed all round with rebated framing. This attractive trellis panel obscures visibilty between boundaries without the need of a solid fence or the need to block out daylight. This product is pressure treated green.
A premium quality Overlap Panel which is built to last.
Height: 1829mm (6') Width: 1829mm (6')
- Fully pressure treated panels - Nailed construction - Straight-edge, horizontal, sawn-finish slats - Five vertical battens on both sides (approx. 16 x 38mm) - Framed top and bottom on both sides (approx. 16 x 38mm) - Finished and protected with a top capping strip - These panels look the same from both sides, perfect for shared boundaries - Manufactured in the U.K.
A premium quality Overlap Panel which is built to last.
Height: 1676mm (5'6") Width: 1829mm (6')
- Fully pressure treated panels - Nailed construction - Straight-edge, horizontal, sawn-finish slats - Five vertical battens on both sides (approx. 16 x 38mm) - Framed top and bottom on both sides (approx. 16 x 38mm) - Finished and protected with a top capping strip - These panels look the same from both sides, perfect for shared boundaries - Manufactured in the U.K.
Slotted Concrete End Post; fully slotted on one side for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.
- Post Dimensions: 90mm x 110mm x 2700mm - Slot Dimensions: 55mm (tapering to 50mm) x 23mm - 56kg Each - C50 Concrete (a strong mix) - Four 5.5mm rebar set inside
Welded wire mesh is produced using wire that is welded on every joint, this makes the product very strong while remaining flexible enough to shape. Galvanised for outdoor use, ideal for use in animal cages & runs etc.
Height: 900mm Length: 6m Mesh size: 13mm x 25mm Wire gauge: 1.0mm Galvanised Manufactured to BS EN 10223-4 1998
These concrete gravel boards are designed to be used with recessed concrete posts. Concrete gravel boards for recessed posts give feather edge fencing a level surface to sit on. Raising feather edge boards on a gravel board will help prevent rot caused by ground moisture, gravel boards also help to prevent damage to fence panels caused by lawn mowers and strimmers.
- Dimensions: 50mm x 150mm x 2400mm - 40kg Each - C50 Concrete (a strong mix) - Two 5.5mm rebar set inside - One 14mm diameter hole in the middle to attach a support post (if required)
Diamond Trellis panels are constructed using good quality planed battens, they are framed all round with rebated framing. This attractive trellis panel obscures visibilty between boundaries without the need of a solid fence or the need to block out daylight. This product is pressure treated green.
2.4m slotted Concrete End Post; fully slotted on one side for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.
- Post Dimensions: 90mm x 110mm x 2400mm - Slot Dimensions: 55mm (tapering to 50mm) x 23mm - 50kg Each - C50 Concrete (a strong mix) - Four 5.5mm rebar set inside
A premium quality Overlap Panel which is built to last.
Height: 1524mm (5') Width: 1829mm (6')
- Fully pressure treated panels - Nailed construction - Straight-edge, horizontal, sawn-finish slats - Five vertical battens on both sides (approx. 16 x 38mm) - Framed top and bottom on both sides (approx. 16 x 38mm) - Finished and protected with a top capping strip - These panels look the same from both sides, perfect for shared boundaries - Manufactured in the U.K.
Wire netting is popular for making poultry runs and enclosures, aviary and bird cages, crop guards, rabbit proofing and general purpose fencing. This wire netting is produced using galvanised wire, it is also hot dipped galvanised after manufacture to offer double corrosion resistance.
Height: 1200mm Length: 10m Mesh Size: 13mm Wire Gauge: 23g (0.57mm) Manufactured to BS EN 10223-2 1998 Reverse Twist Specification.
25m & 50m rolls are available to order, typical lead time 1-2 working days. Call us on 0117 9674382 for prices and availability.
This post support is designed to hold a 150 x 150mm square wooden post in position when it’s not possible to concrete a post into the ground. The bolt-clamp on the side of the post support ensures a quick and secure fit.
- Designed to fit 150 x 150mm square wooden posts - Bolt-Grip post securing system - Bolt down plate: 250 x 250mm - Bolt holes: 4 x 12mm Ø holes for bolting down the base (approx. 210mm hole centres) - Manufactured from heavy gauge 3mm thick steel - Welded construction - Galvanised finish for durability outdoors
Diamond Trellis panels are constructed using good quality planed battens, they are framed all round with rebated framing. This attractive trellis panel obscures visibilty between boundaries without the need of a solid fence or the need to block out daylight. This product is pressure treated green.
3.0m slotted concrete post; fully slotted in a "H" design on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.
- Post Dimensions: 90mm x 110mm x 3000mm - Slot Dimensions: 55mm (tapering to 50mm) x 23mm - 58kg Each - C50 Concrete (a strong mix) - Four 5.5mm rebar set inside
Diamond Trellis panels are constructed using good quality planed battens, they are framed all round with rebated framing. This attractive trellis panel obscures visibilty between boundaries without the need of a solid fence or the need to block out daylight. This product is pressure treated green.
Wire netting is popular for making poultry runs and enclosures, aviary and bird cages, crop guards, rabbit proofing and general purpose fencing. This wire netting is produced using galvanised wire, it is also hot dipped galvanised after manufacture to offer double corrosion resistance.
Height: 1200mm Length: 10m Mesh Size: 25mm Wire Gauge: 20g (0.9mm) Manufactured to BS EN 10223-2 1998 Reverse Twist Specification.
25m & 50m rolls are available to order, typical lead time 1-2 working days. Call us on 0117 9674382 for prices and availability.
A premium quality Overlap Panel which is built to last.
Height: 1219mm (4') Width: 1829mm (6')
- Fully pressure treated panels - Nailed construction - Straight-edge, horizontal, sawn-finish slats - Five vertical battens on both sides (approx. 16 x 38mm) - Framed top and bottom on both sides (approx. 16 x 38mm) - Finished and protected with a top capping strip - These panels look the same from both sides, perfect for shared boundaries - Manufactured in the U.K.
A sturdy yet affordable Overlap Panel which is built to last.
- 6' wide x 6' high (1829mm wide x 1829mm high) - Fully pressure treated panels - Nailed construction - Waney-edge, horizontal, sawn-finish slats - Five vertical battens one side and three vertical battens on the other side (approx. 16 x 38mm) - Framed top and bottom on one side (approx. 18 x 50mm) - Finished and protected with a top capping strip - Manufactured in the U.K.
A sturdy yet affordable Overlap Panel which is built to last.
- 6' wide x 5' high (1829mm wide x 1524mm high) - Fully pressure treated panels - Nailed construction - Waney-edge, horizontal, sawn-finish slats - Five vertical battens one side and three vertical battens on the other side (approx. 16 x 38mm) - Framed top and bottom on one side (approx. 18 x 50mm) - Finished and protected with a top capping strip - Manufactured in the U.K.
Diamond Trellis panels are constructed using good quality planed battens, they are framed all round with rebated framing. This attractive trellis panel obscures visibilty between boundaries without the need of a solid fence or the need to block out daylight. This product is pressure treated green.
A premium quality Overlap Panel which is built to last.
Height: 914mm (3') Width: 1829mm (6')
- Fully pressure treated panels - Nailed construction - Straight-edge, horizontal, sawn-finish slats - Five vertical battens on both sides (approx. 16 x 38mm) - Framed top and bottom on both sides (approx. 16 x 38mm) - Finished and protected with a top capping strip - These panels look the same from both sides, perfect for shared boundaries - Manufactured in the U.K.
Concrete gravel boards slot between concrete posts to give fence panels a level surface to sit on. It is beneficial to use gravel boards if the ground is sloping; the gravel board is dug into the ground to create a level surface instead of digging in the fence panel. Raising the panel on a gravel board will help prevent rot caused by ground moisture, gravel boards also help to prevent damage to fence panels caused by lawn mowers and strimmers.
- Dimensions: 45mm x 300mm x 1829mm - 44kg Each - C50 Concrete (a strong mix) - Three 5.5mm rebar set inside.
A sturdy yet affordable Overlap Panel which is built to last.
- 6' wide x 4' high (1829mm wide x 1219mm high) - Fully pressure treated panels - Nailed construction - Waney-edge, horizontal, sawn-finish slats - Five vertical battens one side and three vertical battens on the other side (approx. 16 x 38mm) - Framed top and bottom on one side (approx. 18 x 50mm) - Finished and protected with a top capping strip - Manufactured in the U.K.
2.7m slotted concrete post; fully slotted on both sides in a "H" design for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.
- Post Dimensions: 90mm x 110mm x 2700mm - Slot Dimensions: 55mm (tapering to 50mm) x 23mm - 52kg Each - C50 Concrete (a strong mix) - Four 5.5mm rebar set inside
Orange Barrier Fencing 1.0m x 50m (4kg), ideal as a temporary safety barrier in many situations. Instant fencing, highly visible, durable and weather resistant. Often used in conjunction with metal fencing pins.
- Height: 1.0m - Roll Length: 50m - Hole size: 40mm x 100mm - 4kg Roll
Diamond Trellis panels are constructed using good quality planed battens, they are framed all round with rebated framing. This attractive trellis panel obscures visibilty between boundaries without the need of a solid fence or the need to block out daylight. This product is pressure treated green.
Wire netting is popular for making poultry runs and enclosures, aviary and bird cages, crop guards, rabbit proofing and general purpose fencing. This wire netting is produced using galvanised wire, it is also hot dipped galvanised after manufacture to offer double corrosion resistance.
Height: 900mm Length: 10m Mesh Size: 13mm Wire Gauge: 23g (0.57mm) Manufactured to BS EN 10223-2 1998 Reverse Twist Specification.
25m & 50m rolls are available to order, typical lead time 1-2 working days. Call us on 0117 9674382 for prices and availability.
Round timber pole; popular as horse jump poles but can also be used in domestic gardens to build garden structures, garden furniture, raised beds, and retaining walls etc. This size of pole is also popular for outdoors activities including raft building, obstacle courses etc. Machine round poles are regularised to ensure a uniform size. Pressure treated to UC4 standard. These poles are flat both (not chamfered).
- 100mm Diameter x 3.6m - Pole; flat ends - Good quality, slow grown redwood - UC4 pressure treatment, 15 year guarantee