Fixings & Metalwork

Black Cable Ties 140mm x 3.6mm (Qty. 100)

Cable ties manufactured from high quality virgin nylon 6.6. Use black ties when secured in direct sunlight

Stock Availability: 5 in stock

£4.00 Inc. VAT

Black Cable Ties 200mm x 4.8mm (Qty. 100)

Cable ties manufactured from high quality virgin nylon 6.6. Use black ties when secured in direct sunlight

Stock Availability: 4 in stock

£4.00 Inc. VAT

Black Cable Ties 300mm x 4.8mm (Qty. 100)

Cable ties manufactured from high quality virgin nylon 6.6. Use black ties when secured in direct sunlight

Stock Availability: 4 in stock

£5.00 Inc. VAT

Brown Wall Plugs - Box of 100

Brown plastic plugs, fix into concrete, brick and masonry by drilling a 7.0mm hole, suitable for use with woodscrews.

- Brown plugs are suitable for No.8 - No.12 (4.0mm - 6.0mm) screws
- Plug Length: 36mm
- Use a 7.0mm masonry drill bit

Stock Availability: 6 in stock

£1.13 Inc. VAT

Elevated Post Base - PPA100

A quality Post Base made by Simpson Strong-Tie. Used to raise timber posts and timber framework above ground level, which prevents rotting caused by moisture from ground contact. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

- Steel S235JR according to NF EN 10025
- Hot-dip galvanized according to NF EN ISO 1461
- Total Height - 100mm
- Tubular Core - 48mm diameter
- Top plate - 100 x 100mm x 4mm
- Base plate - 130 x 130mm x 4mm
- Maximum post cross section - 200 x 200mm
- 11.0mm fixing holes (x8)

Stock Availability: 18 in stock

£32.62 Inc. VAT

Frame Packers - Mixed Pack 100

Plastic colour coded frame packers (45mm x 55mm) have many uses; ideal for packing-out framework, aligning kitchen units, window frames etc. Wedge shaped tips for easy insertion into gaps.

Pack contains (approx):
1mm - Yellow, quantity 25
2mm - Green, quantity 15
3mm - Blue, quantity 15
4mm - Red, quantity 15
5mm - Brown, quantity 15
6mm - Black, quantity 15

Stock Availability: 24 in stock

£7.20 Inc. VAT

Framing Anchor - A34

The Simpson Stong-Tie A34 Framing Anchor is a versatile bracket for many timber framing needs. The speed prong allows you to quickly hold the anchor in place while you get the rest of the fixings in. Galvanised for corrosion resistance.

Thickness: 1.0mm
Width: 34mm x 39mm
Length: 63mm
Fixing Holes: 3.5mm (x8)

Stock Availability: 91 in stock

£0.91 Inc. VAT

Framing Anchor With Bending Straps - A35

The Simpson Strong-Tie A35 anchor’s exclusive bending slot allows instant, accurate bending on site for all two and three-way ties. This framing anchor has a speed prong allowing you to quickly hold the anchors in place while you get the rest of the fixings in.

Thickness: 1.0mm
Width: 36mm x 37mm
Length: 113mm
Slot in Corner: 41mm
Fixing Holes: 3.5mm (x12)

Stock Availability: 105 in stock

£1.07 Inc. VAT

General Pupose Silicone - Clear

Everbuild General Purpose Silicone is a Multi-Purpose acetoxy cure silicone sealant that cures quickly to provide a permanently flexible, high strength waterproof seal. It contains a powerful anti-fungicide to prevent mould growth

BENEFITS
- Permanently flexible.
- Anti-fungal formula - prevents mould growth.
- Quick curing - low dirt pick up.
- Low viscosity for fast application.

AREAS FOR USE
- Sealing glass to glass.
- Sealing glass to aluminium and metal sealing.
- Sealing around baths, showers, basins and other sanitary ware.
- As an adhesive for fixing PVCu trims, cladding and panels.
- Sealing around worktops and laminates.
- Cap glazing to metal, timber and PVCu window frames, and pointing round window and door frames.
- For aluminium gutter sealing.
- General draughtproofing.

Stock Availability: 6 in stock

£4.74 Inc. VAT

Glazing Packers - Mixed Pack 100

- Plastic colour coded flat glazing packers (28mm x 100mm)
- Mixed pack of 6 thicknesses
- Designed for aligning and levelling double-glazed sealed units

Pack contains (approx):
1mm - Green, quantity 25
2mm - Black, quantity 15
3mm - White, quantity 15
4mm - Grey, quantity 15
5mm - Blue, quantity 15
6mm - Red, quantity 15

Stock Availability: 11 in stock

£7.20 Inc. VAT

Ground Socket To Concrete- In - Galvanised

A post support fitting for installing timber posts. The post sits on the socket out of ground contact, which prevents the timber from rotting due to moisture from the ground. It is suitable for structurally supported timber posts that need to last a long time e.g. for a basic timber porch or lean-to. Not recommended for free standing posts e.g. fence posts.

Installation: drill an 18mm diameter hole in the end of the timber post for the Ground Socket to fit into, the hole needs to be at least 155mm deep for the post to sit firmly over the metal dowel down to the square support plate. The bottom of the ground socket is designed to be concreted into the ground, the cross bar ensures a secure fixing within the concrete.

- Welded construction, galvanised steel
- Total length - 600mm
- Fixing Dowel - 18mm diameter x 150mm
- Square support plate 100 x 100mm x 10mm
- Concrete-in section below support plate - 18mm diameter x 450mm
- Concrete-in 'cross bar' - 9mm diameter x 110mm across full width

Stock Availability: 7 in stock

£20.60 Inc. VAT

Heavy Duty Angle Bracket - ABR90

The Simpson Strong-Tie ABR90 (previously E2/2.5/7090) is a heavy-duty reinforced angle bracket (reinforced in corner) for many applications. Galvanised for corrosion resistance.

Measurements (Ref. image 2):
A: 90mm
B: 90mm
C: 65mm
Thickness: 2.5mm
Fixing Holes: 11.5mm (x2) + 5.0mm (x20)

Stock Availability: 143 in stock

From £2.50 Inc. VAT

Light Reinforced Angle Bracket - EA554

The Simpson Strong-Tie EA554, is a light yet sturdy Reinforced Angle Bracket (reinforced in corner). A metal bracket for strengthening corners and connecting a wide range items. Galvanised for corrosion resistance.

Thickness: 2.0mm
Width: 40mm
Length: 53mm x 53mm
Fixing Holes: 11.0mm (x2) + 5.0mm (x8)

Stock Availability: 159 in stock

From £1.04 Inc. VAT

M10 (10mm) x 1000mm BZP Threaded Bar

Mild steel threaded bar / studding.

- M10 (metric 10mm) thread diameter
- 1.0m length
- Mild steel grade 4.6
- Bright Zinc Plated finish (BZP)
- Nuts & washers sold separately

Stock Availability: 27 in stock

£2.05 Inc. VAT

M10 (10mm) x 1000mm High Tensile Threaded Bar - BZP

High tensile threaded bar / studding.

- M10 (metric 10mm) thread diameter
- 1.0m length
- High tensile steel grade 8.8
- Bright Zinc Plated finish (BZP)
- Nuts & washers sold separately

* This is a special order item, typically available within 1-2 working days

Stock Availability: Not in stock - This item is available to order.

From £2.81 Inc. VAT

M10 Form C Washer

A heavy steel washer, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Dimensions: 2mm x 24mm Diameter
11mm Bolt Hole: To suit M10 thread

Stock Availability: 439 in stock

From £0.12 Inc. VAT

M10 Hex Nut

Hex nut with metric thread, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Thread: 10mm - Metric
Depth: 8mm
Spanner Size: 17mm

Stock Availability: 411 in stock

£0.07 Inc. VAT

M10 Nyloc Nut

Hex Nyloc Nut with metric thread, for general use with bolts and threaded bar (studding).
The Nyloc insert prevents accidental loosening caused by vibration.
BZP (Bright Zinc Plate) finish.

Thread: 10mm - Metric
Depth: 10mm
Spanner Size: 17mm

Stock Availability: 145 in stock

£0.10 Inc. VAT

M10 Square Plate Washer

A large heavy steel washer, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Dimensions: 3mm x 40mm x 40mm
11mm Bolt Hole: To suit M10 thread

Stock Availability: 234 in stock

From £0.32 Inc. VAT

M10 x 100mm Carriage Bolt

Carriage Bolt; cup square hex, 23mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.

Stock Availability: 102 in stock

From £0.43 Inc. VAT

M10 x 100mm Coach Screw

Hex head coach screw, for heavy-duty applications. Suitable for fixing into timber, can fix into brickwork and masonry with an M10 plug. M10 washers sold separately.

- Length excludes 7mm bolt head
- 85mm screw thread, 15mm unthreaded
- Bright Zinc Plated finish (BZP)
- Pre-drill timber with 6 - 8mm pilot hole
- Hex Head fits a 17mm Spanner

Stock Availability: 232 in stock

From £0.32 Inc. VAT

M10 x 100mm Hammer Fixing

A light duty fixing for jobs where speed of installation is important.
Hammer fixings work in a similar way to screws and plugs, the hammer fixing screw has a special thread that can be hammered into the plug and loosened / screwed out if required.

Installation:
Pre-drill a 10mm pilot hole through the item that you're fixing and into the masonry or brickwork. Lightly tap the fixing through the pilot hole with a hammer until the plug is flush. EG. if you're fixing a timber wall plate, the plug fits inside the timber as well as the wall. Once the plug is flush with the timber, hit the head of the screw harder to drive it into the plastic sleeve until tight.

Minimum fixing depth: 45mm

Stock Availability: 110 in stock

From £0.36 Inc. VAT

M10 x 100mm Masonry Bolt

A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing.

Drill Bit Dia. - 10mm
Anchor Length - 100mm
Washer Size - 12mm (M12)
Min Hole Depth - 70mm
Min Over Drill Depth - 20mm
Min. Embed Depth - 50mm
Max. Fixture Thickness - 50mm
Drill Bit Dia. for clearance - 12mm (to prevent binding when tightening bolt)
Head Type - Hex Head, 17mm (Across Flats)
Driver Type - Impact driver, socket, spanner
Max Tightening Torque - 60Nm

Stock Availability: 241 in stock

From £1.32 Inc. VAT

M10 x 130mm Carriage Bolt

Carriage Bolt; cup square hex, 23mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.

Stock Availability: 149 in stock

From £0.51 Inc. VAT

M10 x 130mm Coach Screw

Hex head coach screw, for heavy-duty applications. Suitable for fixing into timber, can fix into brickwork and masonry with an M10 plug. M10 washers sold separately.

- Length excludes 7mm bolt head
- 95mm screw thread, 35mm unthreaded
- Bright Zinc Plated finish (BZP)
- Pre-drill timber with 6 - 8mm pilot hole
- Hex Head fits a 17mm Spanner

Stock Availability: 106 in stock

From £0.43 Inc. VAT

M10 x 130mm Masonry Bolt

A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing.

Drill Bit Dia. - 10mm
Anchor Length - 130mm
Washer Size - 12mm (M12)
Min Hole Depth - 70mm
Min Over Drill Depth - 20mm
Min. Embed Depth - 50mm
Max. Fixture Thickness - 80mm
Drill Bit Dia. for clearance - 12mm (to prevent binding when tightening bolt)
Head Type - Hex Head, 17mm (Across Flats)
Driver Type - Impact driver, socket, spanner
Max Tightening Torque - 60Nm

Stock Availability: 133 in stock

From £1.80 Inc. VAT

M10 x 150mm Carriage Bolt

Carriage Bolt; cup square hex, 23mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.

Stock Availability: 142 in stock

From £0.58 Inc. VAT

M10 x 150mm Coach Screw

Hex head coach screw, for heavy-duty applications. Suitable for fixing into timber, can fix into brickwork and masonry with an M10 plug. M10 washers sold separately.

- Length excludes 7mm bolt head
- 105mm screw thread, 45mm unthreaded
- Bright Zinc Plated finish (BZP)
- Pre-drill timber with 6 - 8mm pilot hole
- Hex Head fits a 17mm Spanner

Stock Availability: 128 in stock

From £0.47 Inc. VAT

M10 x 150mm Masonry Bolt

A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing.

Drill Bit Dia. - 10mm
Anchor Length - 150mm
Washer Size - 12mm (M12)
Min Hole Depth - 70mm
Min Over Drill Depth - 20mm
Min. Embed Depth - 50mm
Max. Fixture Thickness - 100mm
Drill Bit Dia. for clearance - 12mm (to prevent binding when tightening bolt)
Head Type - Hex Head, 17mm (Across Flats)
Driver Type - Impact driver, socket, spanner
Max Tightening Torque - 60Nm

Stock Availability: 142 in stock

From £1.99 Inc. VAT

M10 x 160mm Hammer Fixing

A light duty fixing for jobs where speed of installation is important.
Hammer fixings work in a similar way to screws and plugs, the hammer fixing screw has a special thread that can be hammered into the plug and loosened / screwed out if required.

Installation:
Pre-drill a 10mm pilot hole through the item that you're fixing and into the masonry or brickwork. Lightly tap the fixing through the pilot hole with a hammer until the plug is flush. EG. if you're fixing a timber wall plate, the plug fits inside the timber as well as the wall. Once the plug is flush with the timber, hit the head of the screw harder to drive it into the plastic sleeve until tight.

Minimum fixing depth: 45mm

Stock Availability: 112 in stock

From £0.72 Inc. VAT

M10 x 180mm Carriage Bolt

Carriage Bolt; cup square hex, 23mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.

Stock Availability: 160 in stock

From £0.74 Inc. VAT

M10 x 180mm Coach Screw

Hex head coach screw, for heavy-duty applications. Suitable for fixing into timber, can fix into brickwork and masonry with an M10 plug. M10 washers sold separately.

- Length excludes 7mm bolt head
- 125mm screw thread, 55mm unthreaded
- Bright Zinc Plated finish (BZP)
- Pre-drill timber with 6 - 8mm pilot hole
- Hex Head fits a 17mm Spanner

Stock Availability: 143 in stock

From £0.58 Inc. VAT

M10 x 200mm Carriage Bolt

Carriage Bolt; cup square hex, 23mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.

Stock Availability: 187 in stock

From £0.86 Inc. VAT

M10 x 200mm Coach Screw

Hex head coach screw, for heavy-duty applications. Suitable for fixing into timber, can fix into brickwork and masonry with an M10 plug. M10 washers sold separately.

- Length excludes 7mm bolt head
- 135mm screw thread, 65mm unthreaded
- Bright Zinc Plated finish (BZP)
- Pre-drill timber with 6 - 8mm pilot hole
- Hex Head fits a 17mm Spanner

Stock Availability: 123 in stock

From £0.65 Inc. VAT

M10 x 230mm Carriage Bolt

Carriage Bolt; cup square hex, 23mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.

Stock Availability: 131 in stock

From £1.10 Inc. VAT

M10 x 300mm Carriage Bolt

Carriage Bolt; cup square hex, 23mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.

Stock Availability: 60 in stock

From £1.38 Inc. VAT

M10 x 75mm Carriage Bolt

Carriage Bolt; cup square hex, 23mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.

Stock Availability: 70 in stock

From £0.36 Inc. VAT

M10 x 75mm Masonry Bolt

A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing.

Drill Bit Dia. - 10mm
Anchor Length - 75mm
Washer Size - 12mm (M12)
Min Hole Depth - 70mm
Min Over Drill Depth - 20mm
Min. Embed Depth - 50mm
Max. Fixture Thickness - 25mm
Drill Bit Dia. for clearance - 12mm (to prevent binding when tightening bolt)
Head Type - Hex Head, 17mm (Across Flats)
Driver Type - Impact driver, socket, spanner
Max Tightening Torque - 60Nm

Stock Availability: 192 in stock

From £1.03 Inc. VAT

M10 x 80mm Coach Screw

Hex head coach screw, for heavy-duty applications. Suitable for fixing into timber, can fix into brickwork and masonry with an M10 plug. M10 washers sold separately.

- Length excludes 7mm bolt head
- 65mm screw thread, 15mm unthreaded
- Bright Zinc Plated finish (BZP)
- Pre-drill timber with 6 - 8mm pilot hole
- Hex Head fits a 17mm Spanner

Stock Availability: 146 in stock

From £0.29 Inc. VAT

M12 (12mm) x 1000mm BZP Threaded Bar

Mild steel threaded bar / studding.

- M12 (metric 12mm) thread diameter
- 1.0m length
- Mild steel grade 4.6
- Bright Zinc Plated finish (BZP)
- Nuts & washers sold separately

Stock Availability: 22 in stock

£2.68 Inc. VAT

M12 (12mm) x 1000mm High Tensile Threaded Bar - BZP

High tensile threaded bar / studding.

- M12 (metric 12mm) thread diameter
- 1.0m length
- High tensile steel grade 8.8
- Bright Zinc Plated finish (BZP)
- Nuts & washers sold separately

* This is a special order item, typically available within 1-2 working days

Stock Availability: Not in stock - This item is available to order.

From £3.92 Inc. VAT

M12 Form C Washer

A heavy steel washer, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Dimensions: 2mm x 28mm Diameter
13mm Bolt Hole: To suit M12 thread

Stock Availability: 466 in stock

From £0.16 Inc. VAT

M12 Hex Nut

Hex nut with metric thread, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Thread: 12mm - Metric
Depth: 10mm
Spanner Size: 19mm

Stock Availability: 519 in stock

£0.10 Inc. VAT

M12 Nyloc Nut

Hex Nyloc Nut with metric thread, for general use with bolts and threaded bar (studding).
The Nyloc insert prevents accidental loosening caused by vibration.
BZP (Bright Zinc Plate) finish.

Thread: 12mm - Metric
Depth: 12mm
Spanner Size: 19mm

Stock Availability: 76 in stock

£0.13 Inc. VAT

M12 Square Plate Washer

A large heavy steel washer, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Dimensions: 3mm x 40mm x 40mm
13mm Bolt Hole: To suit M12 thread

Stock Availability: 291 in stock

From £0.32 Inc. VAT

M12 Wing Nut

Wing nut with M12 thread.

Width: 47mm
Depth: 20mm
Height: 21mm

Stock Availability: 112 in stock

£0.30 Inc. VAT

M12 x 100mm Carriage Bolt

Carriage Bolt; cup square hex, 30mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.

Stock Availability: 95 in stock

From £0.71 Inc. VAT

M12 x 130mm Carriage Bolt

Carriage Bolt; cup square hex, 30mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.

Stock Availability: 96 in stock

From £0.80 Inc. VAT

M12 x 150mm Carriage Bolt

Carriage Bolt; cup square hex, 30mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.

Stock Availability: 72 in stock

From £0.92 Inc. VAT

M12 x 150mm Masonry Bolt

A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing.

Drill Bit Dia. - 12mm
Anchor Length - 150mm
Washer Size - 14mm (M14)
Min Hole Depth - 85mm
Min Over Drill Depth - 25mm
Min. Embed Depth - 60mm
Max. Fixture Thickness - 90mm
Drill Bit Dia. for clearance - 14mm (to prevent binding when tightening bolt)
Head Type - Hex Head, 19mm (Across Flats)
Driver Type - Impact driver, socket, spanner
Max Tightening Torque - 80Nm

Stock Availability: 88 in stock

From £3.20 Inc. VAT

Payment options